![]() ![]() Displays the video signal coming in from the video transmitter on the quad.1x Display - FPV 4.3 Inch TFT LCD Monitor Screen For RC Models.Gets the streamed video over a 5.8GHz stream.1x Receiver (Also 5.8 GHz) - Eachine RC832 Boscam FPV 5.8G 32CH Wireless AV Receiver.The camera simply records what is going on (the FPV), however it then sends it to the video transmitter which inturn sends it to the reciever.1x Camera with Transmitter (5.8 GHz) - Eachine 700TVL 1/3 Cmos FPV 148 Degree Camera w/32CH Transmission.Lots of Propellers - 6 Pairs Gemfan 5030 CW CCW ABS Propellers.1x Battery - ZOP Power 11.1V 2200MAH 35C Lipo Battery T Plug.It saves you from having to solder directly to the components and helps with wire orginization too. The PDB is optional but highly recommended as it helps manages voltages to the different components such as the ESCs and camera.1x Power Distribution Board - ESC Connection Board Distribution Board.The radio Rx sends signal to the Tx on the quad to tell what direction/manuvers you would like to preform.1x Reciever (Rx) and Transmitter (Tx) - FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter With FS-iA6 Receiver.It also includes useful sensors such as a gyroscope so it can read its current state. The brain of the quad, if recieves input from your radio to tell what systems to run on the quad. ![]()
0 Comments
Leave a Reply. |